Thursday, November 8, 2012

Tips to Choose the Best Wood for making Picture Frames

Tips to Choose the Best Wood for making Picture Frames

Recently I was approached by one of my clients asking about the best wood for making picture frames. As I write a lot about the topic, I have quite good knowledge in the field and after some search on the internet, I gathered really good information about the topic. So, today I am going to share some tips on which wood is the best wood to make picture frames. Hope, you will find the article useful.

The particular question as asked by my client was ?What wood is the most stable and suitable for creating frames with length up to 5 feet??

Actually it depends on many factors like the desired finish of the frame, strength and stability factor, and others. It also depends on whether the frames are paint grade or stain grade. If frames are paint grade, the wood does not matter much, but is frames are stain grade, one need to choose the best wood. On the basis of the wood, there are mainly two types of frames, Hardwood frames and Softwood frames. Balsa wood is a hardwood that is most commonly used to make picture frames. The basic difference between a hardwood tree and a softwood tree is that the seeds of a hardwood tree are covered by something like seeds in an apple while seeds of a softwood tree are uncovered for example a palm tree.

Though sometimes these both terms may be a little confusing, but in picture framing, terms indicates workability of a particular wood rather than its strictness. Basswood is generally used for making softwood frames while for hardwood frames, oak and maple wood is the best because of their density and stability. Many times, a combination of these two types of wood can also be used in making a frame.
Hardwoods as name suggests, are tough and scratch resistant woods. So they are generally more liked than softwood. Most common used hardwoods for making frames are oak, maple, teak, hickory, saw, sand, etc., and most popular soft hardwoods in picture frames are basswood, remin, mahogany, and soft softwoods are pine, cedar, and redwood.

Poplar wood is also becoming quite popular these days for making picture frames.

Here are some tips on how to choose the best wood for Picture Frames

? While choosing the wood for your picture frames, you should go for a more stable wood. Teak wood is quite stable while Oak wood can move quite a bit.
? You can take advice from a local framer or carpenter about what wood will be good for the situation.
? Frames can be made from almost all common wood types. The difference is in their quality and stability.
? Once you have found the right wood for your picture frames, you must also ensure the safety of the wood until your use it.

About the Author

Author is a businessman and a blogger. He loves to write on different topics. Right now he is writing about Wholesale Photo Frames

Article Directory Source: http://www.articlerich.com/profile/jacky0109/225175




Page copy protected against web site content infringement by Copyscape

Do not copy content from the page unless you comply with our terms of service.
Plagiarism will be detected by Copyscape.

Source: http://www.articlerich.com/Article/Tips-to-Choose-the-Best-Wood-for-making-Picture-Frames/2429495

nfl playoffs cincinnati bengals bengals the stand josh mcdaniels cotton bowl wizards of waverly place

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.